Assembly Of The Device; Working With The Device - MSW Motor Technics MSW-TJ2500N Bedienungsanleitung

ASSEMBLY OF THE DEVICE

1. Loosen the screw under the handle socket.
2. Assemble the lever (insert one rod into the other).
3. Insert the lever into the socket.
4. Close the release valve by turning the lever clockwise.
5. Make downward and upward movements with the lever to raise the vehicle.

3.3. Working with the device

LIFTING
Make sure the release valve is closed. Place the jack under one of the support points
on the vehicle (refer to the instructions for use of the car or contact an authorised
service). Pump with the lever with upward and downward movements (in MSW-
TJ3000N and MSW-TJ2000 optional foot pedal) so that the saddle rests centrally on
the vehicle support point. Continue pumping until the vehicle is raised to the desired