Transportation, Storage And Disposal - Husqvarna BMC 335 Bedienungsanweisung

Problem
The motor does not
start.
The product stops af-
ter a while.
The drive system
does not operate cor-
rectly.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
transportation. The tools must not be against
the ground during transportation.
CAUTION:
behind a vehicle.
• The wheels let you move the product shorter
distances. For longer distances, lift the product to
move it or put the product on a vehicle.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
1816 - 001 - 05.04.2022
Cause
A phase of the power supply is missing.
A phase of the power supply is incorrect.
The emergency stop button is engaged.
There is no power in the drive system.
A component is defective.
The OPC is not installed.
The extension cable is disconnected or dam-
aged.
The motor protection switch releases be-
cause of overload.
The motor has a defect.
The drive system pedals are not engaged.

Transportation, storage and disposal

Be careful during
Pull the lift lever before
Do not tow the product
Solution
Do a check of the power supply.
Adjust the phase.
Turn the emergency stop button clockwise to
disengage.
Start the drive system, then start the drum
motor.
Replace the defective component.
Install the OPC.
Connect the extension cable or if it is neces-
sary, replace the extension cable.
Decrease the cutting depth.
Do a check of the motor.
Push the drive system pedals in.
To disengage and engage the drive
system
1. Push the outer ends of the drive system pedals to
disengage the drive system.
31