Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Turn the indicator of rotation handle into the area of desired satellite,
which appears highlighted in colour on the graduation disc.
of the antenna bracket. Once achieved, tighten both screws connecting
the Skew Bracket to the Antenna Body.
Note: Most receivers display the signal strength on the TV set. You can
use this option to maximize the signal strength by sweeping the dish
from side to side.
For fine tuning you may turn the rotation handle slowly to the left or
right. Also, use the elevation handle and turn it marginally clockwise or
counter clockwise to get the best signal.
The graduation disc also will be used to
indicate the approximate direction and
position of the desired satellite. With the
enclosed compass find out the
direction north and turn the
Indicator "N" into this
direction.
Turn the rotation handle slowly inside
this area, until you receive the desired
TV-channel.
Note: Stop rotating the antenna if
you notice a resistance. Don't try to
get over it.
Obtain the Skew Angle of the chosen
satellite. Tilt your antenna to the
specified degree by looking to the
degree graduation located on the back
Werbung
