Installation On Wood Lathe - HOLZMANN-MASCHINEN ABS850DBK Betriebsanleitung

15 OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.

15.1 Installation on wood lathe

Place the suction port at the height of the workpiece. Make sure that it is not in contact with the
workpiece or the machine and that it is placed firmly in relation to the machine.
The suction port is adjusted by means of the holders.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
8. Assembly suction hose
Apply the suction hose (23) to the impeller
housing and to the suction port and fix it with a
hose clamp Ø 90-100 (24) each.
9. Assembly hook
Insert the two hooks into the slots intended for
them.
OPERATION
26
ABS850DBK