Active Console After Starting An Extender - G&D VisionXS-C-DP-UHR Installation Und Bedienung

Configuration

Active console after starting an extender

IMPORTANT:
The activation of the
a second user module are prerequisites for this operation option.
When selecting the
modules do not show an image after restarting the extender. Only after an input is
made at one console, its image is displayed on the monitor.
The setting Active console after start
play you want to activate immediately after starting the extender.
How to select whether and on which module the image display is activated after
restarting the extender:
1. Press Ctrl+Num
2. Select the row
3. Under Active at startup
 After restarting the extender, the image display of buth modules
none
remote 1  After restarting the extender, the image display of the console
remote 2  After restarting the extender, the image display of the console
4. Press F2 to save your settings.
1. In the menu, click on
2. Click twice on the computer module (
3. Under Active console after start
None
CON (Trans. 1)
CON (Trans. 2)
4. .Click on
Save
Related topics:
 Changing the time span of the input lock on page 31
 Right for exclusive access to the console on page 32
37 · G&D VisionXS-C-DP-UHR
Transm. Redundancy feature
Image display option
allows you to define a module whose image dis-
(default) to open the on-screen display.
and press
System setup
select one of the following options:
is switched off (default)
connected to Transmission 1 is activated
connected to Transmission 2 is activated
KVM extender
select one of the following options:
 After restarting the extender, the image display of buth
modules is switched off (default)
 After restarting the extender, the image display of the
console connected to Transmission 1 is activated
 After restarting the extender, the image display of the
console connected to Transmission 2 is activated
.
keep off / Permanently off
.
Enter
.
) you want to configure.
CPU
and the connection to
(see page 34 f.) both