Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
59
Functions
Hygienic flushing
12 h
1-72 Stunden einstellbar
1-72 hours adjustable
Hygieneintervall
30 s
Werkseinstellung
0,15 l/s
Hygiene interval
factory setting
stellbar
able
vall
Laufzeit Hygienespü-
ung
lung Werkseinstellung
val
Running time hygiene
The water runtime of the shower operation and the flow time of the hygiene flush are cou-
!
g
flush factory setting
pled as standard� Separation of both values is possible via the CNX system�
Cleaning stop (CNX only)
With the cleaning stop it is possible to prevent the release of water� This function can be set
as a calendar function for electronic showers, integrated in the CNX water management
system, by the software parameter settings per shower or shower group� For this, please
refer to the software instructions of the CNX system�
CONTI Sanitärarmaturen GmbH | Hauptstraße 98 | 35435 Wettenberg | Deutschland | Tel. +49 641 98221 0 | Fax +49 641 98221 50 | info@conti.plus
www.conti.plus | Druckfehler und Irrtümer sowie technische und maßliche Änderungen vorbehalten. | Errors and technical changes remain reserved.
If the water release is not triggered within the defined time period, the sys-
30 s
tem triggers an automatic water release�
0,15 l/s
Factory setting: 12 hours after last water triggering for 30 seconds of flus-
hing duration�
Battery | Mains
Laufzeit Hygienespü-
The automatic flush intervals can be set to the values "12h, 24h, 72h and
lung Werkseinstellung
off" with the piezo switch during the first 15 minutes after power supply
Running time hygiene
(programming mode)�
flush factory setting
CNX
Other hygiene flush intervals are possible in the CNX system in the range of
1 - 72 hours, or as a calender function�
Werbung
Inhaltsverzeichnis
