ELEMENT
CONTROLS
- Check the operation of the brakes.
- If you have a feeling of softness and pliability, have the
Brakes
safety system checked by an Italjet dealer.
- Check the wear of the brake pads.
- Replace them if necessary (for replacement, contact an
Italjet dealer).
- Check the fluid level in the tank, top up if necessary (to
top up, contact an Italjet dealer).
- Check that there are no leaks in the hydraulic system.
- Make sure the movement is smooth.
Side stand,
- Lubricate the pivot points if necessary.
center stand
Instruments,
- Check the operation of the lights and direction indica-
lights, signals,
tors.
and switches
- Check the operation of the ignition circuit interruption
system.
Side stand
- If the system does not work correctly, have the vehicle
switch
checked by an Italjet dealer.
EN - 31