Engine Maintenance; Ambient Temperature - Honda WMP20X1E Handbuch

ENGINE MAINTENANCE

Engine Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
1. Remove the filler cap/dipstick [1] and wipe it clean.
2. Insert and remove the dipstick without screwing it into the filler
neck. Check the oil level shown on the dipstick.
3. If the oil level is low [3], fill to the edge of the oil filler hole [2] with
the recommended oil. Do not overfill with oil.
4. Screw in the filler cap/dipstick securely.
NOTICE
Running the engine with a low oil level can cause engine damage.
Engine Oil Change
Drain the oil while the engine is warm. Warm oil drains quickly and
completely.
1. Remove the oil
filler cap [1], drain
plug [2], and
sealing washer [3].
Drain the oil into a
suitable container.
2. Reinstall the drain
plug and sealing
washer. Tighten
the plug securely.
Torque:
18 N•m (1.8 kgf•m)
Please dispose of
used motor oil and
the oil containers in
a manner that is
compatible with the
environment. We
suggest you take used oil in a sealed container to your local
recycling center or service station for reclamation. Do not throw it
in the trash or pour it on the ground or pour it down a drain.
3. Fill with the
4. Screw in the oil
[1]
Engine Oil Recommendations
Use 4-stroke motor oil that meets or exceeds the requirements for API
service category SJ or later. Always check the API SERVICE label on
[2]
the oil container to be sure it includes the letters SJ or later.
SAE 10W-30 is recommended
for general use. Other
viscosities shown in the chart
may be used when the average
temperature in your area is
within the indicated range.
[3]
Using nondetergent oil can shorten the engine's service life, and using
2-stroke oil can damage the engine.
[1]
[2]
[3]
ENGLISH
recommended oil
to the top of the oil
filler neck.
filler cap [1]
securely.
[1]
NOTICE
30
5W-30 • 10W-30
0 20 40 60 80 100°F
-20 -10 0 10 20 30 40°C

AMBIENT TEMPERATURE

9