Installation; Minimum Distances - EOS Cubo+ Montage- Und Gebrauchsanweisungen

Installation instructions
The sauna heater is designed for a default sup-
ply voltage of 400 V 3N ~.

Minimum distances

• The minimum height of the sauna cubicle is
1.90 m on the inside (Fig. 1)
Cabin ceiling
4 cm
Cubo+
Fig. 1
Optional accessories
The heater guard rail does not belong to the
scope of delivery and can to be ordered sepa-
rately as an optional equipment (page 25).
The installation is described in a separate
manual.
30
• When you are assembling he sauna heater
you must ensure that the horizontal (at the
side) distance between the heater and cabin
wall is at least 4 cm (Fig. 2).
• The distance from the heater grid and the
bench to other inflammable materials near
the heater must be at least 4 cm. The heater
grid must be more or less the same height as
the front of the heater.
4 cm
• Connect the power supply cable to the heat-
er as shown in the connection plan. The con-
safety distance holder
nection plan is among others attached on
the inner side of the terminal compartment
cover.
• Connect the cable to the control unit. Make
certain to observe the local norms and guide-
lines like e.g. the VDE recommendations.
Ventilation in the
• Mount the cover panel back on the terminal
lower area required
box and secure it with 4 screws.
EN
Cabin wall
Heater guard rail
40 cm
4 cm
38,5 cm
4 cm
4 cm
Fig. 2