tion diagram. An optional plug adaptor
may be used to facilitate the connection.
For practical reasons, this plug adaptor
•
should be fitted on the cabin ceiling.
Take care to ensure that the emitter of the
•
IR heater is not exposed to any mechanical
stresses (knocks, pressure). Risk of break-
age.
Although breakage is unlikely if it is used
•
properly, if the emitter should break, re-
place it with a new one.
Caution: fire risk in the case of a
•
broken emitter.
The heat emitting surface of the IR heater
•
will be very hot during operation. Pay at-
tention not to touch the IR heater during
operation.
The infrared radiator is designed for instal-
•
lation in IR warming cabins only. It must
be used only with a suitable control unit.
The warranty will be void for any other
kind of use.
18
Attention!
By any kind of skin ailments or skin disorder,
consult a doctor before use.
EN