Moza AirCross 2 Benutzerhandbuch Seite 24

Manual positioning
Manual positioning is used to quickly adjust the direction of the camera. When the
function of manual positioning is enabled, the camera orientation can be adjusted by
hand which will not automatically return to the initial position. The adjustment speed is
faster than using the joystick or the following mode. The manual positioning of the tilt
axis is enabled by default on the AirCross 2. Manual positioning of the roll and pan axes
can be enabled in the menu.
Note: The follow function has higher priority than manual positioning. When the
follow function of any axis is on, the manual positioning function cannot be
used. Only after the follow function is off, the manual positioning can be used
normally.
Button Customization
Button Customization is used to specify the function, sensitivity and operation direction
of each button according to the user's habits.
For Example:
By default, moving the joystick up and down controls the tilt axis rotation. It can be
changed to control the roll or pan axis rotation by customizing;
By default, moving the joystick left and right controls the pan axis rotation. It can be
changed to control the tilt or roll axis rotation by customizing.
The higher the sensitivity of the button, the more sensitive and faster the control is. If
you change the 'custom' to -, the direction of operation will be opposite. For more
button customization, please refer to 'Menu Description'.
Inception Mode
The Inception Mode is used to control the camera to rotate in the roll direction for
shooting upside down and rotating footages. In the main interface, triple click the right
button to enter the Inception Mode. After entering the Inception Mode, the camera lens
is vertically up and each axis automatically follows.
24