AL-KO LSV 550/6 Betriebsanleitung Seite 28

GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE
Contents
1 About these operating instructions .......... 29
1.1 Symbols on the title page................... 29
1.2 Legends and signal words ................. 29
2 Product Description ................................. 29
2.1 Designated use .................................. 29
2.2 Possible foreseeable misuse ............. 29
2.3 Residual risks..................................... 29
2.4 Safety and protective devices ............ 30
2.4.1 Motor protection switch................ 30
2.4.2 Two-hand operation..................... 30
2.4.3 Protective bracket........................ 30
2.4.4 Anchoring to the ground .............. 30
2.5 Symbols on the appliance .................. 30
2.6 Electrical requirements....................... 31
2.6.1 Mains connection......................... 31
2.6.2 Mains cable ................................. 31
2.7 Scope of supply.................................. 31
2.7.1 Scope of supply for LSV 550/6
(03) .............................................. 31
2.7.2 Scope of supply for LSV 560/8
(04) .............................................. 31
2.8 Product overview (01, 02) .................. 32
3 Safety instructions ................................... 32
3.1 Operator ............................................. 32
3.2 Personal protective equipment........... 32
3.3 Safety in the workplace ...................... 32
3.4 Safety of persons, animals and prop-
erty ..................................................... 32
3.5 Appliance safety................................. 33
3.6 Safety instructions relating to opera-
tion ..................................................... 33
4 Unpacking appliance (05) ........................ 33
5 Assembly ................................................. 33
5.1 Assembly for LSV 550/6 (06 - 16) ..... 33
5.1.1 Attach wheels [LSV 550/6] (06) ... 33
5.1.2 Attach splitting table [LSV 550/6]
(07 - 09) ...................................... 34
28
Translation of the original instructions for use
5.1.3 Attach operating arms
[LSV 550/6] (10 - 13) ................... 34
5.1.4 Attach retaining claws with pro-
tective bracket [LSV 550/6] (14 -
16) ................................................ 34
5.2 Assembly for LSV 560/8 (18 - 28)...... 34
5.2.1 Attach the wheels [LSV 560/8]
(18)............................................... 34
5.2.2 Attach splitting table [LSV 560/8]
(19 - 21)....................................... 35
5.2.3 Attach operating arms
[LSV 560/8] (22 - 25) ................... 35
5.2.4 Attach retaining claws with pro-
tective bracket [LSV 560/8] (26 -
28) ................................................ 35
6 Start-up...................................................... 35
6.1 Setting up and connecting log splitter. 35
6.2 Check direction of rotation of motor
[LSV 560/8] (29) ................................. 36
6.3 Reversing phases of the mains volt-
age [LSV 560/8] (30) .......................... 36
6.4 Carry out function check (31) ............. 36
7 Operation................................................... 36
7.1 Before each use ................................. 37
7.2 Attaching the splitting table................. 37
7.3 Adjusting the stroke limiter (32) .......... 37
7.4 Adjusting retaining claws (33)............. 37
7.5 Splitting logs (34) ................................ 37
7.6 Removing a jammed log ..................... 38
8 Maintenance and care............................... 38
8.1 Maintenance and care work ............... 38
8.1.1 Grease sliding surfaces (35) ........ 38
8.2 Maintenance tasks.............................. 38
8.2.1 Sharpening the splitting wedge .... 38
8.2.2 Checking and topping up hydrau-
lic oil (36)...................................... 38
9 Transport (37 - 39).................................... 39
10 Storage...................................................... 39
11 Disposal..................................................... 39
LSV 550/6 | LSV 560/8