Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung Seite 43

Problem
The microfiber brushes do
not turn anymore
The microfiber brushes pop
out.
The appliance is not
charging.
When I use my vacuum
cleaner I sometimes feel
static electricity shocks.
Error code 'E2' appears on
the display.
Error code 'E3' appears on
the display.
Possible cause
The microfiber brushes are
clogged with hair or dirt.
The microfiber brushes are not
locked correctly.
The power plug is not
connected properly to the
socket or the adapter is not
inserted into the wall socket
properly.
The battery is not in.
The battery is not completely
inserted.
Wrong adapter connected.
Your vacuum cleaner builds up
static electricity. The lower the
air humidity, the more static
electricity the appliance builds
up.
You vacuumed up dust and
dirt. This also causes static
electricity.
The temperature is too low.
The temperature is too high.
Solution
Clean the microfiber brushes with a pair of
scissors or by hand (see 'Cleaning the
AquaSpin nozzle').
Place the microfiber brushes back in the
right position and lock them.
Make sure that the power plug is
connected properly to the socket and that
the adapter is inserted into the wall socket
properly.
Please insert the battery.
Please insert the battery until you hear a
click sound.
Please use the original adapter.
If you have checked the above and the
appliance still does not charge, take it to a
Philips service center or contact the
Consumer Care Center.
Make sure to touch the metal pin with your
hand while holding the appliance.
Make sure to touch the metal pin with your
hand while holding the appliance.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is above 5 °C.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is below 35 °C. Do not expose the
device to direct sunlight or high
temperatures (near hot stoves, in
microwave ovens, or on induction cookers).
Batteries may explode if overheated.
If you have checked the above and the
appliance still does not charge, take it to a
Philips service center or contact the
Consumer Care Center.
English
45