Connecting The Speakers; Mp3-Player - Trevi AVX 615 BT Gebrauchs- Und Anschlusshandbuch

NOTES OF USE
This device is a high precision electronic instrument; therefore avoid using it in the following cases:
• Near strong heat sources such as heaters and stoves.
• In very humid places such as bathrooms, swimming pools, etc.
• In very dusty places.
• In places subject to strong vibrations.
• Position the appliance so that there is always enough space on its sides for free circulation of air (at least 5 cm).
• Do not block the ventilation slots.
• If liquids penetrate inside the appliance, immediately disconnect the plug from the socket and take the appliance to the
nearest TREVI authorized service center.
• Always check before switching on the appliance that the power and connection cables are correctly installed.
• The appliance must not be exposed to dripping or splashing water. No objects filled with liquid, such as vases, should
be placed on the apparatus.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Keep this manual.
CARE AND MAINTENANCE
For cleaning, we recommend using a soft, slightly damp cloth. Avoid solvents or abrasive substances.
IMPORTANT
The good construction of this device guarantees its perfect functioning for a long time. However, should any problems arise,
it will be advisable to consult the nearest authorized Service Center.

CONNECTING THE SPEAKERS

1. With the device disconnected, insert the red RCA plug cable from the right speaker into the red OUTPUT socket (R)
and the white RCA plug cable from the left speaker into the white OUTPUT socket (L). The OUTPUT sockets are
located on the rear of the control unit.
POWER ON/OFF AND ADJUSTMENTS
1. Turn the POWER switch to ON to turn on the device.
2. Start playing the desired audio source. To change source, press the INPUT button (1).
3. Adjust the volume using the volume control (7) on the main speaker or using the VOL + and Vol- buttons on the remote
control.
Note: the two adjustments are independent, in case of low volume make sure that the adjustment via the remote control is set
to the maximum level.
Press the MUTE button (11) on the remote control to immediately mute the speakers; press it again to turn the sound
back on.
4. Turn the POWER switch to OFF to turn off the appliance.
MP3 PLAYER
1. Insert an SD memory in the input (6) with the electrical contacts facing upwards or a USB device in the input (5).
Playback will start automatically.
2. Press the PLAY / PAUSE (4) button to momentarily stop playback. Press it again to restart it.
3. Press the NEXT (3) or PREV (2) button to move to the next or previous track.
4. Press the INPUT button (1) to switch between the USB, SD, BT and LINE inputs.
LINE IN
1. Connect the RCA connectors of the audio cable to the INPUT socket on the back of the control unit and the cable
jack to the headphone socket or line-out of an audio source (TV / Monitor, Tablet, DVD / Mepg4 players, audio for
computers, mobile phones, MP3 players, etc ...).
NOTE: it is advisable not to set the volume of the audio source too high in order not to saturate the speaker input.
AVX 615 BT
7