Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning
Hei-TORQUE Expert restart function
➜
Switch on the device and use the speed controller to set the rotational speed value
213 rpm
to [
]: Value has white background field.
➜
Wait for approx. six (6) seconds until the value is accepted: Value is displayed
without background field.
➜
Then use the speed controller to set the rotational speed values in chronological
214 rpm
order to [
until the value is accepted.
➜
As soon as the last value [
completed:
–
On activating the function, the [
–
In operation with active automatic restart, a white warning symbol is shown at
the top edge of the screen.
–
On deactivating the function, the [
–
As soon as the automatic restart function is deactivated, the warning symbol at
the top edge of the screen goes out.
On restarting an Hei-TORQUE Expert after a power interruption,
a [
white warning symbol at the top edge of the screen then flashes
until the rotational movement is stopped normally.
A power interruption that occurs during unsupervised operation can
be identified by the flashing function.
Hei-TORQUE Ultimate restart function
➜
Switch on the device and, if applicable, use the push-and-rotary control to select
Speed
the [
] parameter on the device display (value is displayed in orange font).
Press the push-and-rotary control to confirm.
➜
Use the push-and-rotary control to set the rotational speed value to [
and wait briefly until the value is accepted (value is displayed continuously).
➜
To activate/deactivate the function, press and hold the push-and-rotary control and
Cal
then press the [
–
On activating the function, a white separating line appears between the header
and the central area.
–
On deactivating the function, the white separating line between the header and
the central area is hidden.
On restarting an Hei-TORQUE Ultimate after a power interruption,
a [
separating line between the header and the central display area
then flashes red until the rotational movement is stopped normally.
A power interruption that occurs during unsupervised operation can
be identified by the flashing function.
215 rpm
216 rpm
], [
], [
217 rpm
] has been accepted, the status change is
restart on
restart off
Rotation
] warning triangle appears on the display briefly, a
] function button.
Rotation
] warning triangle appears on the display briefly, the
217 rpm
] and [
] notice is displayed briefly.
] notice is displayed briefly.
67
] and wait each time
213 rpm
]
Werbung
Inhaltsverzeichnis
