Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
Aim of the manual
This manual is intended as a guide for correct installation, starting up, usage, cleaning
and maintenance of the roof top air conditioner, highlighting the residual risks and
those arising from incorrect usage. This manual must be considered as an integral part
of the product, and must therefore be kept carefully. Some figures in this manual may
show details or features that differ slightly from those of the actual product, although
essential information has not been modified. The manufacturer reserves the right to
update this manual without notice, when it deems this necessary.
2
General warnings
To use the product safely and correctly, please follow the instructions in this manual.
The manufacturer is not responsible for any damage resulting from the non-observance
of the instructions contained in this manual. The product which this manual refers to, is
designed for the air-conditioning of heavy vehicle cabins. Using it for other purposes is
not permitted. All other uses are considered improper and therefore dangerous. Read the
labels on the various components of the unit carefully, do not cover them for any reason
and replace them immediately when damaged. If the unit malfunctions, disconnect
its unit power supply. Normal operation of the product also depends on efficient and
effective maintenance. Knowledge of the maintenance procedures is therefore needed.
Major or unscheduled maintenance must be performed by professionally qualified
personnel only. Some parts of the unit can get hot or have potentially sharp edges.
Before performing any cleaning or maintenance operations, disconnect the power
supply and wait for the unit to cool down. When carrying out maintenance or cleaning
work, please use suitable personal protective equipment in accordance with current
regulations. Do not let water or other liquids enter inside the air conditioner through its
ventilation openings. In particular, when washing the vehicle, do not direct the water
jet onto the ventilation grilles. Do not use harmful substances to clean the product. In
case of fire, use a powder extinguisher. The unit packaging material must be disposed
of according to the current regulations (see section '11. Disposal')
3
About the manufacturer
This conditioner was designed and manufactured exclusively by:
4
Product identification data
On each AC unit there is a label containing the following data:
-
model
-
unit number
-
part number for the compressors
-
power supply voltage
-
power absorption (W)
-
current absorption (A)
-
refrigerant type
Vitrifrigo s.r.l.
Via Della Produzione, 9
61020 Montecchio (PU)
Tel. +39 0721 491080
Fax. +39 0721 497739
E-Mail. vitrifrigo@vitrifrigo.com
www.vitrifrigo.com
EN
21
Werbung
Inhaltsverzeichnis
