ENGLISH
8. Clean the glass panels with water and
soap. Dry the glass panels carefully. Do
not clean the glass panels in the
dishwasher.
When the cleaning is completed, install the
glass panels, the door trim and the oven
door, close the levers on the both hinges.
Make sure that you put the glass panels (A
and B) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and
assembly easier.
The screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel
frame on the screen-printing zones is not
rough when you touch it.
When installed correctly the door trim clicks.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Make sure that you install the middle panel
of glass in the seats correctly.
How to replace: Lamp
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
A
B
Warning! Risk of electric shock.
The lamp can be hot.
Put a cloth on the bottom of
the cavity.
23
A
B
Step 3