Service Data - IKEA KULINARISK 704.210.83 Bedienungsanleitung

ENGLISH
Problem
There is water inside the
oven.
The steam cooking does not
work.
The steam cooking does not
work.
It takes more than three mi‐
nutes to empty the water
tank or the water leaks from
the steam inlet opening.
The display shows F111.
The display shows an error
code that is not in this table.
Steam and condensation set‐
tle on the food and in the
cavity of the oven.
The lamp is turned off.

Service data

If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Possible cause
There is too much water in
the tank.
There is no water in the tank.
Lime obstructs the hole.
There are lime deposits in
the oven.
The plug of the core temper‐
ature sensor is not correctly
installed into the socket.
There is an electrical fault.
You left the dish in the oven
for too long.
The Moist Fan Baking func‐
tion is turned on.
We recommend that you write the data here:
Turn off the oven and wipe
the water with a cloth or
sponge.
Fill the water tank.
Check the steam inlet open‐
ing. Remove the lime.
Clean the water tank. Refer
to "Cleaning the water tank".
Put the plug of the core tem‐
perature sensor as far as
possible into the socket.
• Turn off the oven with the
• If the display shows the
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Normal behavior of the Moist
Fan Baking function. Refer to
"Daily Use" chapter, Heating
Functions.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
.........................................
.........................................
Remedy
house fuse or the safety
switch in the fuse box and
turn it on again.
error code again, contact
an Authorised Service
Centre.
31