Replacement Of The Motor Protection Filter; Replacement Of Hepa Filter - Fakir Red Vac Power Bedienungsanleitung

Replacement of the
motor protection filter
Replacement of HEPA
filter
Cleaning and Maintenance
ATTENTION!
If a larger motor protection filter is available in the dust
bag package, please cut this off so that it shall be
suitable for the appliance. Ensure that the motor
protection filter always cover the vacuum motor
completely and that no dust can reach the motor.
1. Open the dust compartment lid and remove the dust
bag (see replacing the dust bag)
2. Pull out the motor protection filter holder upwards.
3. Remove the motor protection filter and insert a new
filter.
4. Slide the motor protection filter back to its position.
5. Insert the dust bag again and close the dust com
partment lid (see replacing the dust bag)
NOTE!
Replacement period: Approx. after 6 months.
HEPA filter is located under the air outlet grid.
1. Remove the air outlet grid by pressing the locking
button.
2. Remove the HEPA filter and replace it with a new
one.
3. Insert the air outlet grid again and close it until it is
audibly snapped in.
HEPA* = HIGH EFFICIENCY PARTICULATE
41