Transport And Storage - Kathrein EXIP 4124 Bedienungsanleitung

1. Enter the IP address of the EXIP 4124 in the web browser, followed by the port 9527,
e.g. 192.168.175.35:9527.
2. Enter the password
➯ It is possible to edit the web interface settings.
Tip
The IP address of your EXIP 4124 is indicated in the router menu. Alternatively,
the IP address can be determined using a software utility,
e.g. Intel® Tools for UPnP Technology.
You will fi nd more detailed instructions for the web interface at www.kathrein-ds.com.
Troubleshooting
Problem
Stream LED
does not
light up
Power LED ON/OFF switch is positioned
does not
light up
Repair and Replacement
autronic electronic service GmbH
Hauptstraße 2a
35798 Löhnberg-Oberhausen, Germany
Phone +49 6477 6123 101
Fax +49 6477 6123 020
E-Mail: service-kathrein@autronic-service.de

Transport and Storage

► Transport and store the device in its original packaging.
► Protect the device against dust, dirt, moisture and direct sunlight.
► Transport and store the device only in the permitted temperature range between -25
and +70 °C. Make sure there is no water condensation build-up.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
EXIP 4124, order no.: 20510136 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.kathrein-ds.com
exip
.
Possible cause
No network connection
on OFF
Power supply unit is not
connected
Connect network cable
Check the switch on the rear panel of the
device and set it to ON
Connect the power supply unit to the
server and connect it to the 230-V mains.
7 / 8
Solution