Ray Receiver And Addresses - Panasonic CS-W14BB4P Bedienungsanleitung

5-6 Ray receiver and addresses

Ray receiver
ADDRESS SET
AIR SWING FAN SPEED OPERATION
AUTO
OPERATION
FILTER RESET
AUTO
SELECT
CLOCK
RESET ADDRESS SET
All manuals and user guides at all-guides.com
OPERATION
C/H
T I M E R
1 2 3
F I LT E R
COOL
TIMER
8
ADDRESS
TEST RUN
MANUAL
9
1 Ray receiver
Received signals transmitted by the remote control.
2 EMERGENCY button
Used to force the indoor unit to turn on or off during emergency.
3 C/H switch
Used to force operation to switch to cooling or heating mode
during emergency.
4 OPERATION indicator
Illuminates when the indoor unit is operating. (It flashes when
there is a malfunction.)
5 TIMER indicator
Illuminates during REMOTE operation and when timer operation
has been set.
6 FILTER indicator
(Illuminates after the cumulative running time reaches
approximately 2,500 hours of operation.)
7 ADDRESS SET switch
Set this button to the remote control address number only when
using more than one indoor unit.
Only the indoor unit which corresponds to the
address set number can be operated.
8 ADDRESS number display
9 ADDRESS SET button
Press with a fine-tipped object.
The address number display changes in the order [ADDRESS 1]
➝ [ADDRESS 2] ➝ [ADDRESS 3] ➝ [GROUP] each time you
press the button. If the address is set to GROUP, the indoor units
can be operated regardless of the address set number on the ray
receiver.
• At the time of shipment from the factory, both the ray
receiver and the remote control are set to ADDRESS 1.
You do not need to change these settings for normal
operation.
I Emergency operation
This is useful when you have misplaced the wireless remote
control or if the batteries are weak.
(1) For cooling operation, set the C/H switch on the ray receiver
to C; for heating operation, set it to H.
(2) Press the EMERGENCY button. Operation will then start
according to the conditions as given in the table below.
T e m
C o o n i l g
o p e a r o i t n
H e a n i t g
o p e a r o i t n
(3) Press the EMERGENCY button once more to stop the
operation.
– 15 –
p e a r u t e r
F a n p s e e d
s t e n i t g
2 ° 2 C M E D
2 ° 8 C M E D
L o v u r e
s t e n i t g
A U T O
A U T O