Specifications - Sony BRAVIA KD-100ZD9 Referenz-Anleitung

The , +, and – buttons cannot be located on
the TV.

See below illustration for location of the buttons
on the TV.
Rear of TV
The illumination LED is turned on.

If you do not wish to light up the illumination LED,
you can turn it off.
Press HOME, then select [Settings] 
[Illumination LED]  [Off].
Cannot connect to a wireless router by WPS
(Wi-Fi Protected Setup).
If you use WEP security, select [Easy] 

[Wi-Fi]  [Connect by scan list]. Then, select the
network name (SSID) you want to connect.
Cannot find the required network name in
network setup.

Select [[Manual entry]] and press
network name.
18 GB

Specifications

System
Panel system
LCD (Liquid Crystal Display) Panel, LED Backlight
TV system
Depending on your country/area selection/TV
model
Analogue: B/G, D/K, L, I
Digital: DVB-T/DVB-C
Satellite*: DVB-S/DVB-S2
Colour system
PAL, SECAM, NTSC3.58 (Video only), NTSC4.43
(Video only)
Channel coverage
Depending on your country/area selection/TV
model
Analogue: UHF/VHF/Cable
Digital: UHF/VHF/Cable
Satellite*: IF Frequency 950-2,150 MHz
Sound output
10 W + 10 W
Wireless technology
Protocol IEEE802.11ac/a/b/g/n
(IEEE802.11ac may not be available depending on
countries/regions.)
Bluetooth Version 4.1
* Not all the TV sets have DVB-T2 or DVB-S/S2
technology or satellite antenna terminal.
Input/Output jacks
to enter
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
Satellite antenna
Female F-Type Connector, 75 ohm.
DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single
Cable Distribution EN50494.
/
21-pin scart connector (CENELEC standard)
including audio/video input, RGB input and TV
audio/video output.
/ AV 2
Video/Audio input (mini jack)
DVB-T2*
AV 1