Troubleshooting; Service Data; Energy Efficiency - Electrolux FR53G Benutzerinformation

Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The door gasket is dam‐
aged.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. ENERGY EFFICIENCY

13.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
20 ENGLISH
Check if...
The fuse is blown.
Do not use the oven.
Contact an Authorised
Service Centre.
Problem
End of Cooking - is not
set.
The lamp does not work.

12.2 Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Electrolux
FR53G 949496705
FR53R 949496708
FR53S 949496704
KOHHH00K 949496728
KOHHH00W 949496727
KOHHH00X 949496729
ROB2201AON 949496709
95.2
Check if...
Set: End of Cooking. Re‐
fer to "Clock functions".
The lamp is burnt out.