Screen Settings - Sony GXD-L65H1 Bedienungsanleitung

Screen Settings

For Video Input
VIDEO
PAP Setting
Allows you to show two pictures from different signal sources, such as a PC and a
video, side by side.
"PAP"
"Off": Disables "PAP" function.
"P&P": Shows two pictures side by side at the same time.
"PinP": Displays two pictures as the inset picture within the main picture.
For P&P
"Active Picture": Selects the screen to operate.
"Left": You can activate the left picture to operate it.
"Right": You can activate the right picture to operate it.
"Swap": Swaps the two pictures side by side.
"Picture Size": Adjusts the balance between two pictures side by side. Adjust the
balance by pressing G or g button, and then press
(page 16)
For PinP
"Active Picture": Selects the screen to operate.
"Main": You can activate the main picture to operate it.
"Sub": You can activate the inset picture to operate it.
"Swap": Swaps the main and the inset pictures.
"Picture Size": Adjusts the size of the inset picture. Select from "Large" or "Small".
"Picture Position": Adjusts the position of the inset picture with F/f/G/g, then
press .
Notes
• In "PAP" mode, "Picture Mode" and "Sound Mode" are reflected in the main picture
settings.
• You cannot change the aspect ratio in the "PAP" mode. The picture is displayed in the last
aspect ratio used prior to selecting "PAP" mode.
To highlight an option and to change settings, press
F f G g
/ / / .
Press to confirm the selection.
The "Screen" settings include the following options:
button to set the adjustment.
GB
27
GB