Connections; Connecting The Ac Power Cord And Cables - Sony GXD-L65H1 Bedienungsanleitung

Connections

Before you start
• First make sure that the power of each piece of equipment
is turned off.
• Use cables suitable for the equipment to be connected.
• Connect the cables, fully inserting them into the
connectors or jacks. A loose connection may cause hum
and other noise.
• To disconnect the cable, pull it out by grasping the plug.
Never pull the cable itself.
• See the instruction manual of the equipment to be
connected, too.
• Insert the plug securely into the AC IN socket.
• Use one of the two AC plug holders (supplied) to securely
hold the AC plug.
Connecting the AC
Power Cord and Cables
1
Plug the AC power cord into the AC IN
socket. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC IN
socket
AC power cord
AC plug holder
2
Slide the AC plug holder over the cord until
it connects to the AC IN socket cover.
AC IN socket cover
To remove the AC power cord
After squeezing the AC plug holder and freeing it,
grasp the plug and pull out the AC power cord.
3
Connect the cables to the terminals and
secure the AC power cord and cables.
Using the grooves in the holder and cushion, push
the cables in at right angles to the cushion and
secure them with the cable clip.
Note
If using speakers (not supplied), continue by connecting
them.
Holder
Cushion
Cable clip
19
GB
GB