Screen Settings - Sony FWD-50PX3 Bedienungsanleitung

Screen Settings

For Video Input
PAP Setting
Available combination of two pictures
DVI
RGB
HD15
Component
* "OPTION1+OPTION2" is not supported.
1)
Supported when "Display" is set to "YUV" or when "Option1" or "Option2" is set to "RGB" in "HD15 Signal".
2)
Supported when "Display" is set to "RGB" or when "Option1" or "Option2" is set to "YUV" in "HD15 Signal".
24
GB
Allows you to show two pictures from different signal sources, such as a PC and a
video, side by side.
"PAP"
"Off": Disables "PAP" function.
"P&P": Shows two pictures side by side at the same time.
"PinP": Displays two pictures as the inset picture within the main picture.
For P&P
"Active Picture": Selects the screen to operate.
"Left": You can activate the left picture to operate it.
"Right": You can activate the right picture to operate it.
"Swap": Swaps the two pictures side by side.
"Picture Size": Adjusts the balance between two pictures side by side. Adjust the
balance by pressing G or g button, and then press
(page 15)
For PinP
"Active Picture": Selects the screen to operate.
"Main": You can activate the main picture to operate it.
"Sub": You can activate the inset picture to operate it.
"Swap": Swaps the main and the inset pictures.
"Picture Size": Adjusts the size of the inset picture. Select from "Large" or "Small".
"Picture Position": Adjusts the position of the inset picture with F/f/G/g, then
press .
HD15
DVI
RGB Component
a
a
a
To highlight an option and to change settings, press
F f G g
/ / / .
Press to confirm the selection.
The "Screen" settings include the following options:
RGB Component
a a
a
1)
a
button to set the adjustment.
OPTION 1/2
Video S Video
a a
2)
a
a
a
a
a