Samsung DW6M605 Serie Benutzerhandbuch Seite 42

Installing your dishwasher
STEP 5. DISHWASHER INSTALLATION
U P
D O
W N
UP
DOW
N
1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the
template for positioning of the brackets. (For Fully built in and Semi built in dishwasher)
2. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tight en the
left and right door springs. Failure to do this could cause damage to your dishwasher. (For Fully built in
and Semi built in dishwasher)
3. Connect the inlet hos e to the cold water supply.
4. Connect the drain hose. Refer to diagram.
5. Connect the power cord.
6. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip is
flush with edge of work surface.
7. Place the dishwasher into position.
8. Level the dishwasher. The rear food can be adjusted from the front of the dishwasher by turning the
Allen screw in the middle of the base of dishwasher use an Allen key. To adjust the front feet, use a flat
screw driver and turn the front feet until the dishwasher is level.
9. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface : Put the installation hook into the slot of the side plane and se cure it to the
work surface with the wood screws.
B. Marble or granite work top : Fix the side with Screw.
42_ Installing your dishwasher
DW5500M_DD81-02437M-00_EN.indd 42
UP
DOW
N
U P
D O
W N
2019-04-22 12:48:04