Assembly Manual - Zipro Holo 2 Bedienungsanleitung

EN

ASSEMBLY MANUAL

CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
STEP 1.
Fix the rear (3) and front base (2) to the main frame
(1) using bolts (8) and curved washers (13).
ATTENTION! Remove any plastic
or cardboard safety inserts before assembly.
STEP 2.
Screw the left and right pedal (16L/R) to the crank
(15L/R). Screw the right pedal (16R) bolt on
clockwise and the left pedal (16L) bolt
counterclockwise.
ATTENTION! The right pedal is marked 'R', and the
left pedal is marked 'L'.
STEP 3.
Fix the saddle (23) to the horizontal adjustment
saddle bracket (21). Remove the adjustment knob
(26) from the main frame (1), and fix the saddle
column (4) to the main frame (1). Secure the knob
(26) at the right height.
ATTENTION! Do not exceed the maximum and
minimum height marked on the bracket when
adjusting the saddle height.
22