General Assembly Requirements - Pfannenberg PWI 6302C/ 115 V Betriebsanleitung

GB
3.4.1

General assembly requirements

The following general requirements must be ensured for safe and reliable operation of the air/water heat
exchangers:
 The place where the switch cabinet is to be set up must be selected so as to guarantee adequate ventilation of
the air/water heat exchanger.
 Installed components in the switch cabinet must not impede air circulation.
 Secure the switch cabinet against tipping.
 Ensure that provided hinges can support the additional weight with the air/water heat exchangers.
 Assembly of the air/water heat exchanger can take place with and without an external unit cover.
 Following assembly (without unit cover), attach the line/ protective grounding, connection line/display unit and
assemble everything together on the unit.
 Protect the installation location from heavy contamination with covers.
Operating manual PWS and PWI 6302 C 086100048 © Pfannenberg GmbH Page 11 / 31