Citizen CT-S2000 Benutzerhandbuch Seite 34

b) Black mark paper (BM paper)
D
C
F
Mark
A
Right edge of black mark
B
Left edge of black mark
C
Black mark height
D
Cut position in black mark
E
Top margin
F
Black mark pitch
G
Bottom margin
CAUTION!
■ PCS value of black mark must be 0.9 or more.
■ When using the black mark paper, consider the margin of +/- 2 mm for the print position
against the standard position and maximum -5% for print length.
■ Refer to the above drawing for the printable area and have enough margings specified
in the marks E and G. If the print data size is out of the printable area, the printer
should skip to next page.
A
B
Cut position
Printable area
Black Mark (printed on the reverse)
Item
13.5 or more 57.5 or more 80.5 or more
1.5 or or less 45.5 oror less 68.5 or or less
5
2.5
6.5
30 to 300
9
— 31 —
Dimensions
BM1 BM2
E
Paper feeding
direction
G
Unit: mm
BM3