Target Group; Basic Safety Information - Siko MS500 Originalmontageanleitung

MS500
Safety information
Important operating information that may facilitate operation or many
NOTICE
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal signs

2.3 Target group

Installation instructions is intended for the configuration, commissioning
and mounting personnel of plant or machine manufacturers who possess
special expertise in drive technology. This group of operators needs pro-
found knowledge of a magnetic sensor necessary connections and its inte-
gration into a complete machinery.
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or magnetic sensor.
` Configuration, commissioning, mounting and maintenance by trained
` This personnel must be able to recognize dangers that might arise
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

2.4 Basic safety information

Danger of explosion
DANGER
` Do not use the magnetic sensor in explosive zones.
Movable parts
WARNING
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
` Install protective facilities to prevent people from getting access.
MS500 · Date 27.04.2018 · Art. No. 80296 · Mod. status 118/18
expert personnel only.
from mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
English 15