Machine-Specific Safety Warnings - Bosch PSR 300 LI Bedienungsanleitung

OBJ_BUCH-89-004.book Page 25 Thursday, October 19, 2006 8:26 AM

Machine-specific Safety Warnings

Cordless Screwdriver
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or may
cause an electric shock.
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Hold the machine only by the insulated gripping sur-
faces, when performing an operation where the cutting
tool may run into hidden wiring. Contact with a "live" wire
will make exposed metal parts of the tool "live" and shock the
operator.
Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
Take protective measures when dust can develop dur-
ing working that is harmful to one's health, combustible
or explosive. Example: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with dust/chip extraction
when connectable.
Keep your workplace clean. Blends of materials are partic-
ularly dangerous. Dust from light alloys can burn or explode.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
2 609 001 313 • 19.10.06
English | 25