Product Overview
1. Handle
2. Self-propel bar
3. Blade-control bar
4. Adjustment knob for the
self-propel drive
5. Rear deflector (not shown) 13. Bag-on-demand lever
6. Washout port (not shown) 14. Handle lock (2)
7. Fuel-tank cap
8. Air filter
1. Grass bag
Figure 7
9. Cutting-height lever (4)
10. Spark-plug wire
11. Side-discharge deflector
12. Oil fill/dipstick
15. Recoil-start handle
Figure 8
2. Side-discharge chute
Specifications
Model
Weight
38 kg
20965
(83 lb)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
working properly.
•
Always inspect the machine to ensure that the
g233307
blades, blade bolts, and cutting assembly are not
worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.
– Shut off the engine, remove the ignition key
(electric-start model only), and wait for all
moving parts to stop.
– Do not put your fingers under the housing
when adjusting the cutting height.
Fuel Safety
•
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
g027237
– To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
– Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.
– Do not handle fuel when smoking or around an
open flame or sparks.
8
Length
Width
Height
157 cm
61 cm
(62
(24
inches)
inches)
112 cm
(44
inches)