Product Overview
1. Blade-control bar
2. Self-propel bar
3. Adjustment for the
self-propel drive
4. Rear deflector (not shown) 11. Cutting-height lever (4)
5. Washout port (not shown) 12. Handle lock (2)
6. Fuel-tank cap
7. Air filter
1. Grass bag
Figure 7
8. Spark plug
9. Side-discharge deflector
10. Oil fill/dipstick
13. Handle
14. Recoil-start handle
Figure 8
2. Side-discharge chute
Specifications
Model
Weight
35 kg
21761
(78 lb)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Always shut off the machine, wait for all moving
parts to stop, and allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
g305034
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
functioning properly.
•
Always inspect the machine to ensure that the
blades and blade bolts are not worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Contact with the moving blade will cause serious
injury. Do not put your fingers under the housing
when adjusting the cutting height.
Fuel Safety
•
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
– To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
g009571
– Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.
– Do not handle fuel when smoking or around an
open flame or sparks.
– Do not remove the fuel cap or add fuel to the
tank while the engine is running or hot.
7
Length
Width
Height
150 cm
58 cm
(59
(23
inches)
inches)
107 cm
(42
inches)