Description - IBEA 45-L Gebrauchsanweisung

GB
ENGLISH
31- Transport the brushcutter motor still with cover the di-
sco fitted
32- To avoid the risk of injury, stop the engine and blade
before removing material wrapped around the head or blade.
33- Always use a sharp blade, a dull blade is more likely to
snag and thrust. Replace a dull blade. DO NOT attempt to
sharpen.
1. Ignition switch
2. Throttle lock.
3. Throttle trigger.
4. Throttle advance (for cold engine start).
5. Primmer
6. Fuel cap.
7. Fuel tank.
34- Always stop engine and examine the blade after striking
any hard object.
35- In order to maintain performance and safety,be sure to
use original spare parts and accessories approved by the
manufacture.
36- When saw blade is used, fit the specific blad e guard.

3. DESCRIPTION

8. Starter grip.
9. Air filter.
10. Handle.
11. Harness hanger
12. Transmission tube
13. Clutch housing (antivibration
system)
22
14. Blade safety guard
15.
Decompressor
(only mod. 5.5)
16. Gear Head
17. Sleeve
18.
Head ACTIVE
19. Pin
20. Lever