Names And Functions Of Controller Components; Basic Mode; Controller Interface - Mitsubishi Electric PAR-31MAA Einfache Bedienungsanleitung

Names and functions of controller components

The main display can be displayed in two different modes: "Full" and "Basic."
Display
The factory setting is "Full."
Full mode
6
7
8
9
0
Cool
1
a
Mode

Basic mode

Cool
1
Mode
* All icons are displayed for explanation.

Controller interface

4
Function buttons
7
• When the backlight is off, pressing any button turns the backlight on and
does not perform its function. (except for the ON/OFF button)
• Most settings (except ON/OFF, mode, fan speed, temperature) can be
made from the Menu screen.
4
b c d e f g h
3
Fri
i
j
Room
Set temp.
Auto
4
Temp. Fan
k 2
5
2
3
Fri
Set temp. Auto
4
Temp. Fan
5
3 2 1
8 9 0
1Operation mode
Indoor unit operation mode appears here.
2Preset temperature
Preset temperature appears here.
3Clock
(See the Installation Manual.)
Current time appears here.
4Fan speed
Fan speed setting appears here.
5Button function guide
Functions of the corresponding buttons appear
here.
6
Appears when the ON/OFF operation is centrally
controlled.
7
Appears when the operation mode is centrally
controlled.
8
Appears when the preset temperature is centrally
controlled.
9
Appears when the filter reset function is centrally
controlled.
0
Indicates when filter needs maintenance.
aRoom temperature
(See the Installation Manual.)
Current room temperature appears here.
b
Appears when the buttons are locked.
1 ON/OFF button
Press to turn ON/OFF the indoor unit.
2 SELECT button
Press to save the setting.
3 RETURN button
5
Press to return to the previous screen.
4 MENU button
Press to bring up the Main menu.
6
5 Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any
button turns the backlight on and it
will stay lit for a certain period of time
depending on the screen.
6 ON/OFF lamp
This lamp lights up in green while the unit
is in operation. It blinks while the remote
controller is starting up or when there is
an error.
c
Appears when the On/Off timer, Night setback, or
Auto-off timer function is enabled.
appears when the timer is disabled by the
centralized control system.
d
Appears when the Weekly timer is enabled.
e
Appears while the units are operated in the
energy-save mode.
f
Appears while the outdoor units are operated in
the silent mode.
g
Appears when the built-in thermistor on the
remote controller is activated to monitor the
room temperature (a).
appears when the thermistor on the
indoor unit is activated to monitor the room
temperature.
h
Indicates the vane setting.
i
Indicates the louver setting.
j
Indicates the ventilation setting.
k
Appears when the preset temperature range is
restricted.
The functions of the function buttons
change depending on the screen. Refer
to the button function guide that appears
at the bottom of the LCD for the functions
they serve on a given screen.
When the system is centrally controlled,
the button function guide that
corresponds to the locked button will not
appear.
Main display Main menu
Fri Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Room
Timer
Cool Set temp. Auto Weekly timer
OU silent mode
Main display:
Mode Temp. Fan Cursor Page
7 8 9 0 7 8 9
Function guide
7 Function button F1
Main display: Press to change the operation
mode.
Main menu: Press to move the cursor down.
8 Function button F2
Main display: Press to decrease temperature.
Main menu: Press to move the cursor up.
9 Function button F3
Main display: Press to increase temperature.
Main menu: Press to go to the previous page.
0 Function button F4
Main display: Press to change the fan speed.
Main menu: Press to go to the next page.
0