Environmental Information - Flymo Turbo Lite 330 Originalanleitung

surfaces other than grass.
11. Never operate the product with damaged guards
or without guards in place.
12. Keep hands and feet away from the cutting means
at all times and especially when switching on the
motor.
13. Do not tilt product when the motor is running,
except when starting and stopping. In this case,
do not tilt more than absolutely necessary and
lift only the part which is away from the operator.
Always ensure that both hands are in the
operating position before returning the appliance
to the ground.
14. Never pick up or carry a product when it is
operating or still connected to the mains supply.
15. Remove the plug from the mains :
- before leaving the product unattended for any
period;
- before clearing a blockage;
- before checking, cleaning or working on the
appliance;
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a
professional application.
Husqvarna UK Ltd. products are manufactured under
an Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for
recycling at the end of the productsʼ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised
recycling.
• Awareness of the environment must be considered
when disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for disposal
information.
If any part is found to be defective due to faulty
manufacture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge
providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used outside of the
country for which it was specified.
(i) The machine has not been used commercially.
* This guarantee is additional to, and in no way
diminishes the customers statutory rights.
SAFETY PRECAUTIONS
SERVICE RECOMMENDATIONS

ENVIRONMENTAL INFORMATION

GUARANTEE AND GUARANTEE POLICY
ENGLISH - 2
- if you hit an object. Do not use your product
until you are sure that the entire product is in a
safe operating condition.;
- if the product starts to vibrate abnormally. Check
immediately. Excessive vibration can cause
injury.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure
the product is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Only use the replacement spare parts and
accessories specified for your product.
4. Be careful during adjustment of the product to
prevent entrapment of the fingers between
moving cutting parts and fixed parts of the
machine.
5. Store in a cool dry place.
6. Renew your metal blade after 50 hours mowing or 2
years whichever is the sooner - regardless of
condition.
The symbol on the product or on its packaging
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
council office, your household waste disposal service or the
shop where you purchased the product.
Failures due to the following are not covered, therefore it is
important that you read the instructions contained in this
Operator's Manual and understand how to operate and
maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
with the instructions and recommendations contained in
this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim:
Blades, Electric Mains cable.
* Caution! Husqvarna UK Ltd. does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or
approved by Husqvarna UK Ltd., or by the machine
having been modified in any way.