Controls And Functions - Eizo DuraVision FDSV1201 Installationshandbuch

Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact
your local EIZO representative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Analog signal cable : MD-C87
Attention
• This product does not include a power cord. Please provide separately a power cord which meets the usage requirements.
For more information, please contact your local EIZO representative.

Controls and Functions

*1
Setting menu
1 2 3
1. button
2. button
3. button
4. button
5. button
6. Power indicator
7. Power connector
8. Input signal connector Left: DVI-D connector / Right: D-Sub mini 15-pin connector
9. USB upstream port
*2
(for FDSV1201T only)
10. RS-232C port
*2
(for FDSV1201T only)
11. Stand
12. Cable holder
*1 For instructions for use, refer to the User's Manual on the CD-ROM.
*2 These ports cannot be used at the same time. When cables are connected to both ports, the USB port is prioritized.
• USB cable: MD-C93 (for FDSV1201T only)
• EIZO LCD Utility Disk (CD-ROM)
• Setup Manual (this manual)
4 5 6
Switches input signals for display.
Changes Color Mode.
Displays the Setting menu, determines an item on the menu screen, and saves
adjusted values.
• Provides the menu selection as well as the adjustment and setting of a function.
• Displays the Brightness menu.
Turns the power on or off.
Indicates the monitor's operation status.
Blue: Operating Orange: Power saving mode OFF: Power off
Connects the power cord.
Connects a PC and monitor via a USB cable when this product is used as a touch
panel monitor.
Connects a PC and monitor via a RS-232C cable when this product is used as a touch
panel monitor.
Used to adjust the angle of the monitor screen.
Covers the monitor cables.
11
7 8
12
9 10
5