Troubleshooting; Care And Cleaning; Technical Data - Renkforce 2391160 Bedienungsanleitung

b) Bluetooth pairing and connection
1. When off, long-press the MFB button for 5-8 seconds to enter pairing mode (the LED will
flash blue and red alternately).
2. In the phone's Bluetooth device list, search for and select "RF-PHS-500". When connected,
the LED will flash blue and you can listen to music on the phone through the headset.
Search and connect
3. The MFB, Volume + and Volume - buttons can now be used to control music playback and
phone calls.
c) Connecting to two devices
1. Follow section b) above to connect to the first device, and then turn off Bluetooth on the
first device.
2. Double press the MFB button to enter pairing mode again (the LED will flash red and blue
alternately).
3. In the second device's Bluetooth device list, search for and select "RF-PHS-500".
4. On the first device, turn on Bluetooth again and reconnect to "RF-PHS-500". The headset
is now connected to the two devices.
Note that music can only be played from one device at a time. The same applies to phone
calls.
d) LED indicator
Mode
Power on
Power off
Pairing mode
Unconnected, standby mode
Connected, standby mode
Playing music
Talking
Delete paired history
Charging
Fully charged
Low battery
e) Charging
Charge the headset when the LED flashes red. The charging time is approx. 2 hours. The LED
will change from constant red to constant blue when the headset is fully charged. Charge the
headset using the supplied Micro USB cable, or place the headset in the charging dock and
connect the Micro USB cable between the dock and mains socket.
Charging with charger Charging with PC
Charging with charger Charging with PC
LED indicator
LED flashes blue every 1 second
LED turns off after flashing red for 1 second
LED flashes blue and red alternately
LED flashes blue every 2 second
LED flashes blue every 5 second
LED flashes blue every 5 second
LED flashes blue every 5 second
LED flashes blue and red once
LED constant red
LED constant blue
LED flashes red
f) Troubleshooting
1. How can I reconnect the headset to my device?
When the headset first connects to your device, the headset will subsequently search for
and reconnect to the device automatically when powered on. If this fails, pair and connect
to the device again.
2. How can I delete the paired device history?
When on, long-press the Volume + and Volume - button for 5 seconds to clear the paired
device history. The LED will flash blue and red once to indicate this and devices removed
from the pairing history will have to be reconnected. If you have trouble connecting, deleting
the paired device history will often solve the issue.
3. What is the pairing password?
Some connection devices require a pairing password. For these devices, try "0000", "8888",
"1111" or "1234".
4. What can I use to charge the headset?
Any DC 5 V charger with a current over 500 mA, such as a car charger, power bank,
computer, etc., can be used to charge the headset.
5. How can I use the headset for three-way calling?
When you are in a call and receive another call, short press the MFB button to answer the
new call and hang up the previous call.
6. When you are in a call and receive another call, double press the MFB button to answer the
new call and keep the previous call.
When you are in a call and receive another call, long-press the MFB button for 1 second
to reject the new call.
When on a three-way call, double press the MFB button to switch audio between the calls.

Care and cleaning

• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

Input current ................................. DC 5 V, 500 mA
Headset battery ............................ Lithium-Polymer 180 mAh, 3.7 V (embedded)
Bluetooth version .......................... 5.0
Supports ....................................... A2DP, AVRCP, HFP, HSP
Supported operating systems ....... Windows
iPad OS 13.1 or later
Sound pressure level .................... max. 80.34 dB
Range ........................................... 10 m
Noise-cancelling ........................... CVC6.0
Battery use per charge ................. 17 hours talking/music
200 hours standby
Operating/storage conditions ........ 0 to +40 °C (operating)
-10 to +50 °C (storage)
25% to 60% RH (non-condensing)
Dimensions (W x H x D) ............... 142 x 49 x 163 mm
Weight .......................................... 242 g (headset, charging dock, cable)
54 g (headset)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
10, Mac OS X 10.1, Android 8.0, iOS 13.1,
®
*2391160_v2_1121_02_DS_m_4L_(1)