Startup / Operation
The cooker hood is to operate via touch control:
Operation
Switch operation on/off
Power level
1 low → 2 medium → 3 strong with booster function
The display shows the selection.
Lighting
Switch lighting on/off
Ambient lighting (backlighting)
Function button for ambient lighting
Settings
Power level 1:
Suitable for cooking on a low flame and for dishes
which produce no or little steam to circulate the air
around the kitchen.
Power level 2:
Suitable for normal cooking.
Power level 3 (booster function):
Suitable if large quantities of smoke and steam need
to be extracted or filtered (e.g. when frying).
The booster function initially operates with increased
power, after approx. 7 minutes the appliance auto-
matically switches to the medium power level.
NOTE:
With very strong vapor emission, the fan should con-
tinue running after cooking for a few minutes.
Ambient lighting
The switchable backlight ensures atmospheric light-
ing.
Use the function button to switch the background
lighting in light blue (factory setting) on and off again.
Select another color and save it:
First activate the automatic color change, see
"Automatic color change",
ton in your favorite color; the color shines perma-
nently.
Press the button again, the automatic color
change will continue and the selected color tone
is saved.
The backlight is switched on again in the color tone
selection you have saved.
The color selection can be changed at any time.
Automatic color change
If you do not want to decide on a color alone, you
can use the function button to activate a play of col-
ors that gently blends the different tones into one
another.
Keep pressing the function button in the off state
for approx. 3 seconds, the colors change auto-
matically:
↪light blue → dark blue → green → red↩
Keep pressing the function button again for ap-
prox. 3 seconds, the lighting switches off.
Energy saving tips
Information to reduce the environmental effect of
cooking (acc. VO (EU) No. 66/2014 appendix I,
No. 2)
The diameter of the pot and pan floors should be
according to the size of the cooking zone.
Use pans and pots with flat floors, uneven floors
increase the energy consumption.
Ensure that there is enough supply air for the oper-
ation of the cooker hood.
Adjust the fan step intensity of the damp evolution
of the cooking process.
To product the optimal effect of the cooker hood,
install it according to the installation instructions.
46
press the function but-