Installation - Oase ProfiClear Premium L Gebrauchsanleitung

Installation

Prior to installing and connecting the filter module, some components must be installed:
ProfiClear Premium L
Standing Bed Module Discharge Module




Installing the slide valve for the dirt outlet
How to proceed:
1. Push the slide valve into the pipe sleeve and secure it with the hose clip.
2. Push the pipe sleeve with the hose clip onto the socket on the container.
3. Screw the holding plate of the slide valve onto the two threaded bolts with the cap nuts.
4. Secure the pipe sleeve with the hose clip.
Tätigkeit
 (→ Installing the slide valve for the dirt outlet)
 (→ Fitting the inlet Ø 180 mm)
 (→ Fitting the outlet DN 150)
 (→ Fitting the outlet DN 110)
EN
ProfiClear0006
25