Specifications; Ambient Conditions - WIKA TIF50 Betriebsanleitung

3. Specifications

3. Specifications
Specifications
Display principle
Display measured value
Bar graph
Information line
Status indicators
Indication range
Measuring rate
Accuracy
Temperature coefficient
Permissible maximum
current
Voltage drop
HART functionality
®
Access control
■
Automatically set
■
parameters
Available commands
■
Identified commands
■
Multidrop
■
EMC directive

Ambient conditions

Ambient temperature
Functional area of the display
Vibration resistance
Shock resistance
1) Special version on request (only available with selected approvals)
2) In previous ambient temperatures < -20 °C a delayed recovery of the indication function could be expected, especially in
case of low loop current.
WIKA operating instructions models TIF50, TIF52
Model TIF50
LCD, rotatable in 10° steps
7-segment LCD, 5-digit, character size 9 mm
20-segment LCD
14-segment LCD, 6-digit, character size 5.5 mm
♥ ♥
: HART : HART mode (signalling of HART mode (signalling of HART
® ®
: Unit lock : Unit lock
: Warnings or error messages : Warnings or error messages
-9999 ... 99999
4/s
±0.1 % of the
measuring span
±0.1 % of the measuring span/10 K
100 mA
< DC 3 V (< DC 2 V at 20 mA); supply via current loop
-
Unit, measuring range
-
Generic mode:
1, 15, 35, 44
Not supported
EN 61326 emission (group 1, class B) and interference immunity
(industrial application) as well as per NAMUR NE21
Models TIF50, TIF52
-60 / -40 ... +85 °C
1)
-20 -20 ... +70 °C ... +70 °C
2) 2)
3 g per EN 60068-2-6
30 g per EN 60068-2-27
Model TIF52
parameter adoption) parameter adoption)
® ®
±0.05 % of the measuring span
Secondary master
Unit, measuring range start/end, format,
zero point, span, damping, polling address
Generic mode:
0, 1, 6, 15, 34, 35, 36, 37, 44
Measured values are automatically taken
from the HART digital data and displayed
®
EN
9