Manual Tuning - Renkforce 2356115 Bedienungsanleitung

• Select the desired station using the rotary knob (6) or the arrow buttons (26).
• Press the rotary knob (6) or the OK button (24) to confirm the selection and receive the station.
• Press the arrow button < (26) to return to the station list and select another station.
New stations are not automatically added to the station list. A new station scan must be performed for this
purpose.
• To start a new station scan, activate FM station scan in the settings menu (see chapter "Settings").
Calling up station information
During playback of a station, you can call up further information about this station or the track currently being played
or the time and date.
The information available depends partly on the station's broadcast content. It may take some time for all
contents to become available.
• Press and hold the arrow button > (26), or the
Manage station list
• Highlight the station to be edited in the station list.
• Press the arrow button > (26).
• Further options will appear in the menu with which the station can be moved or deleted.

Manual tuning

• Press and hold the rotary knob (6) or the OK button (24) until TUNING appears at the bottom right of the display.
• Set the desired frequency using the
arrow buttons (26) on the remote control.
• When the desired frequency is set, press and hold the rotary knob (6) or the OK button (24) to exit manual tuning.
TUNING will disappear from the display.
62
button (7) on the device to display further information.
(5) or buttons (7) on the device or the corresponding