Speaker Selection - Panasonic TX-24FS503E Hilfe

Speaker Selection

You can control the theatre speaker with this TV's remote control by pointing
at the TV's signal receiver.
1. Display Apps with APPS.
2. Select VIERA Link
3. Select Speaker Selection
4. Select TV / Home Cinema
TV:
TV speakers are active.
Home Cinema:
The sound is delivered from theatre speakers. Player theatre, Blu-
ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode.
The sound of TV speakers is mute. When the equipment is turned
●
off, TV speakers will be activated.
You can use
●
■
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Audio (Dolby Digital)
5.1ch) via an Amplifier, connect it with an HDMI cable and Optical digital audio
cable, and then select
5" function, you only need to connect it with an HDMI cable to the TV's HDMI2
terminal.
To enjoy multi-channel sound from DIGA Recorder, connect an HDMI cable
from the DIGA Recorder to the Amplifier.
= Note =
If you cannot operate the equipment, check the settings and the
●
equipment.
Functions > VIERA Link "HDAVI Control™" > Summary of VIERA Link
Some operations may not be available depending on the equipment.
●
and press OK to access.
and press OK
and press OK
Volume Up / Down
Home Cinema. If your Amplifier has the "HDAVI Control
- 216 -
to access.
to set.
and MUTE.