Panasonic TX-24FS503E Hilfe Seite 504

DVB-via-IP Server Selection
■
Preparations
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
Ensure the server settings are completed. For details, read the manual of
●
DVB-via-IP server.
■
DVB-via-IP Server Selection
1. Display the menu with MENU.
2. Select Setup > Tuning Menu
3. Select DVB-via-IP
4. Select Start Auto Setup
5. Select a server from
6. Select Client Settings
Select Unicast Environment
●
Select Multicast Environment
●
hospital, etc. (All servers are selected automatically.)
7. Select Search Channels
8. Set DVB-via-IP Search Mode
Set DVB-via-IP configuration to tune DVB channels.
●
When the operation is completed, the channel at the lowest position will
●
be displayed.
= Note =
If tuning has not been done completely, set
●
Watching > Tuning and editing channels > Manual Tuning
Due to network conditions or certain broadcaster restrictions, this function
●
may not be available.
In case you install the DVB-via-IP client in multicast environment, please
●
consult your professional dealer or server manufacturer.
> Add TV Signal
and press OK to access.
and press OK
Server List and press
and press OK to access.
to use in a home network.
to use in multi family housing units, hotel,
and press OK
and select
- 201 -
and press OK
to access.
OK to set.
to access.
Start Auto Setup.
Manual Tuning.
to access.