Setting The Alarm Volume; Setting The Alarm Repetition; Switching The Alarm Clock On/Off; Switching Off The Alarm Clock After The Alarm Sounds - Sonoro sonoroRADIO Bedienungsanleitung

All manuals and user guides at all-guides.com
Fig. 24: Setting the alarm source
1. Turn the click wheel to select the medium you
want to use:
FM Select an FM station preset from
the station memory that you
wish to start the device with and
wake up to.
DAB Select a DAB station preset from
the station memory that you
wish to start the device with and
wake up to.
Relax Music Select a Relax Music sound from
the memory you wish to start
the device with and wake up to.
Ringtone Select a ringtone from the
memory that you wish to start
the device with and wake up to.
2. Press the click wheel or the [OK] button on the
remote control to confirm your setting.
ð The alarm source is set.
9.3

Setting the alarm volume

After you have set and confirmed the alarm source,
you can set the alarm volume (Fig. 25).
Fig. 25: Setting the alarm volume
1. Turn the click wheel to set the desired volume.
2. Press the click wheel or the [OK] button on the
remote control to confirm your setting.
ð The alarm volume is set.
i
The alarm audio playback always starts with the
minimum volume and gradually increases to the
specified volume level.
9.4

Setting the alarm repetition

After you have set and confirmed the alarm volume,
you can set the alarm repetition (Fig. 26).
88
Fig. 26: Setting the alarm repetition
1. Turn the click wheel to set the desired alarm
repetition. You can choose between the fol-
lowing settings:
n Once
n Daily
n At weekends
n Weekdays
2. Press the click wheel or the [OK] button on the
remote control to confirm your setting.
ð The alarm repetition is set.
9.5

Switching the alarm clock on/off

Switching on the alarm clock
1. To switch on the alarm clock, briefly press the
[Alarm 1] or the [Alarm 2] button on the front of
the device or the remote control.
Switching off the alarm clock
2. To switch off the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button again.
9.6 Switching off the alarm clock after
the alarm sounds
1. To switch off the alarm, press one of the fol-
lowing buttons:
n [Alarm 1]
n [Alarm 2]
n Control knob
n [Standby]
ð The alarm will remain activated for the next
day. This does not apply if the non-recurring
alarm setting is in use.