Tank filler plug (fig. 19)
Opening
Lift the protection lid (1) and fit the ignition key into the
lock. Turn the key clockwise 1/4 turn to unlock. Lift the
plug.
Closing
Refit the plug with the key in it and push it down into its
seat.
Turn the key anticlockwise to its initial position and take it
out. Close the lock protection lid (1).
Note
The plug can only be closed with the key in. Close
the plug to remove the key.
Warning
Always make sure you have properly refitted (see
page 33) and closed the plug after each refuelling.
1
1/4
OPEN
0
E
fig. 19
21