Information Symbols In This Manual; Before Use - MTD Cub Cadet Zero Turn 17AIEACI603 Originalbetriebsanleitung

EN

Information symbols in this manual

The signs and symbols in this manual should help
you to use the manual and mower quickly and
safely.
Note
practical use of the mower.
Action step
Prompts you to perform an action.
Result of action
quence.
[1]Item number
Item numbers are indicated in the text by square
brackets [ ].
Illustration label
Illustrations are numbered with letters and
Step number
Protection of yourself and others
Do not let children or persons who have not
read these usage instructions use the device.
Do not permit children under the age of 16
to handle this power tool or perform other
work on the device, such as maintenance,
cleaning, adjustment, etc. Local regulations
may determine the minimum age for users.
Any person intending to operate this mower
must not be under the in uence of intoxicants
such as alcohol, drugs or medicines.
Do not use the mower if you have not
received appropriate training or are tired or ill.
Exercise caution and do not reach into the
cutter blades.
Remember that the operator is responsible
for accidents involving other persons and/or
their property.
This device may be used by persons with
limited physical, sensory and mental abilities
or a lack of experience and knowledge if they
are being supervised or have been trained
in how to use the device safely and they
understand the dangers associated with it.
Do not put the device in operation if there
are people (especially children) or animals in
immediate proximity.
10
Safety information
Ensure children do not play with the device.
Stop working if you notice people (especially
children) or pets in proximity.
When working with or on the device, always
wear rm shoes, long trousers and other
appropriate personal protective equipment
(protective goggles, protective helmet,
hearing protection, work gloves, etc.) Wearing
personal protective equipment reduces the risk
of injuries. Avoid the wearing of loose clothing
or clothing with hanging cords or belts. Working
without ear protection may result in loss of
hearing.
-

Before use

Before you begin work, make sure that you
are familiar with the device, its controls and
how to operate it.
Check whether all xing elements (nuts, bolts
and screws, etc.) are tightly t to ensure that
the device is operated safely.
Only operate the device in a technically
faultless state. Never change the engine
service centre.
Remove the adjustment tool or wrench before
switching on the device. A tool located in the
rotating cutting tools area may lead to injuries.
Never use a device with defective, damaged
or missing safety/protective equipment.
Safety/protective equipment are a component
of the device, are there fore your protection and
must always be functioning. You must not modify
safety/protective devices, remove them or bypass
their function. Have damaged safety/protective
devices repaired or, if necessary, replaced by a
technician or service centre.
Check the discharge ap for damage and tight
tting.
Check (by means of visual inspection)
whether the cutting blades and their xings
are blunt, damaged or deformed.
Before mowing, make sure that the lawn is
free from branches, stones, wire etc. and look
out for such objects the whole time when
mowing.
Safety information