Installation Instructions - Konig HC-PS310 Bedienungsanleitung

Installation instructions

Install the batteries
1. Open the battery cover (on the underside of the scale) by releasing the clip and lifting the cover.
2. Insert the batteries.
Be sure the polarity of the batteries is set properly.
3. Close the cover.
Select weighing mode
Switch the scale on (ON/OFF button).
Use the Weight units selection button (underside of scale) to select the weight units (KG/LB/ST).
Place the scale
Place the scale on a firm, flat and even surface to ensure accuracy.
1. Battery compartment cover
2. Weight units selection button
4