Herunterladen Inhalt Inhalt Diese Seite drucken

Installing The Monitor - SOMFY V 350 Montage- Und Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für V 350:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
EN
NB
If you wish to control your Somfy RTS gate motorisation remotely via the monitor, you must save the radio control before
the final monitor installation procedure (the monitor must be brought to the gate motorisation while powered via its mains
adapter) or activate the button on the gate motorisation, depending on the motorisation models.
See section "Saving the gate motorisation in the monitor's memory".
[1]. Fix the monitor mounting plate to the wall.
Important: The monitor mounting brackets must come out towards
you.
Note: All the wires must pass inside the mounting bracket so they can be
connected to the monitor.
[2]. Connect the mains adapter connector at the rear of the monitor
to terminal block 7-1 in the direction indicated in the illustration
(screws towards the right); the direction in which the wires are
connected to the power pack is important.
Important: It is essential to use the mains adaptor provided to power
the monitor.
Note: You can use a mains adapter compatible with the DIN rail as an
option (ref.: 9026469).
Important: Do not connect the mains adaptor to a socket, or engage
the DIN supply until all the wiring is completed (door station, additional
monitor).
[3]. Connect the second connector supplied to terminal block 7-2.
The corresponding cable shall be connected to the door station.
Optional: Connect a third connector to the terminal block 7-3. The
corresponding cable shall be connected to a second monitor (see
the additional monitor's instructions).
Note: Place the wires in their intended locations to prevent any risk of
them being pulled out.
Note: Identify the wires used for terminal blocks 7-2 and 7-3 in order
to correctly wire the door station and the additional monitor (optional).
2 nd monitor Call station
[4]. Clip the monitor to the mounting support, sliding it gently
downwards until the support brackets are well inserted into the
monitor's slots.
7

4 - INSTALLING THE MONITOR

DC 24V
-
-
+
+
7-1
7-2
7-3
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.
V®350 video entry phone

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis